• Typical Single Phase: 1.3 – 1.4 Tesla
• Typical Three Phase: 1.25 – 1.35 Tesla

Saturation:

• Induction (T) as cast: 1.56

No-load Core Loss and Exciting Power:

• At the test condition of 1.3T, 50Hz, specific loss ≤0.18W/kg; specific exciting power ≤0.45VA/kg
• At the test condition of 1.3T, 50Hz, specific loss ≤0.20W/kg; specific exciting power ≤0.60VA/kg
• The no-load loss and exciting power of the three-phase – Evans core will be approximately 25% higher and will vary according to the specific design

• Guaranteed Minimum: 86%

Density:

• g/cm3 as cast: 7.19

Core Design Standards:

• Ribbon width (A): 142mm, 170mm, 213mm
• Core build-up (B): 0~300mm; maximum
• Window width (C): 55~1500mm; tolerance: +3/-0m
• Window height (D): 180~2000mm; tolerance: +3/-0mm
• Joint build (G): B x 1.10~1.20mm
• Window radius (R): 6.4 +/-1.5mm
• Outermost layer shearing length: not more than 100000mm
• Continuous service temperature: 150oC

The core surface is coated in Epoxy Resin, not more than 2mm thick per side, (Dimension (H)) Ribbon width +4mm.